DRESS your IQOS Device Completely made in Italy

Dress your Iqos with the most requested accessory thanks to a Registered Design and Exclusive Profiles 

Specially designed to give to your device an inimitable and special look.

immagine%20di%20copertina%20iqos2.png

Currently, Hangover offers two types of materials that are unique of its kind:

  • SMARTSKIN IN SPECIAL RESINA 
  • SMARTSKIN IN SPECIALE TESSUTO

Thanks to the special features of the SmartSkins, you can see the beautiful graphics specially designed to give your Iqos a unique style and design.

SMARTSKIN RESINA.jpg

The ADHESIVE SMARTSKIN IN RESIN is designed to give the Iqos Device an extraordinary Design and more:

The Special Removable Adhesive:

  • it allows to change the skin and the desired design with simplicity and without residues (follow carefully  the instructions to best preserve the properties of the removable glue *)


The Special Resin:

  • allows a perfect adhesion on the Device without wrinkles and imperfections
  • HD graphics - It enhances and brightens the colors and images through the vividness of the resin and protects them over the time
  • ANTI-SLIP and PROTECTIVE preventing accidental falls of your iQOS Device by also providing adequate protection for surfaces
  • CLEANABLE: You can clean the smasrtkin with a humid cloth while preserving its shine
  • Very pleasant to the touch
  • Original

USEFUL INSTRUCTIONS and TIPS - for a correct application of the RESIN SmartSkins

 FOR A PERFECT ADHESION heat the smartskin to attack it and remove it

To guarantee the full effectiveness of the glue and the perfect adhesion and removal of the skins, we recommend you to 

CAREFULLY follow these recommendations:

Clean carefully the surface of the device , removing dust and stains, then attack the skin; to ACTIVATE TO THE BEST the special glue we recommend heating the skin with a hair dryer for at least 10/20 seconds so that the glue is activated perfectly and the resin softens to the point that it adheres properly to the device.

Since the glue of the adhesive is still fresh, the Skin will tend to rise at the bent points of the device;

Just press lightly on these points for the first few days so that the Skin can adapt perfectly to the device and have that elegance and style that makes it unique.

During this period, we recommend avoiding very dusty places so as not to deposit dust on the adhesive walls, and compromise the Skin's tightness.

TO REMOVE THE SMARTSKIN FROM THE DEVICE: 

we recommend that you heat the skin 20/30 seconds with the hairdryer, so that the resin becomes softer and the adhesive leaves no residue on your device, so you can put the skin that you do not use on the liner in the box (that we advise not to throw).

Furthermore, by not throwing the packaging, you help us preserve the environment by following our mission to generate as little waste as possible in product design.

The ADHESIVE SMARTSKIN in SPECIAL TEXTILE IS specifically designed for IQOS Device with a unique Style and Design.

SPECIAL, multicolored decorative TEXTILE able to cover your Iqos without compromising the original design.

  • The Material in TEXTILE style used to make this particular SmartSkin, has properties and unique features of its kind by providing the Device with an exclusive "suit" that can be reused whenever you want.
  • Slim and resistant thanks to the characteristics of the material
  • Protects and gives a touch of class and elegance
  • Decorative for its HD graphics well printed on the textile
  • Waterproof and cleanable



The Removable and Reusable Adhesive several times thanks to a special structure that allows, in fact, to easily change the SmartSkin and the desired design for your device. (follow carefully the instructions to best preserve the properties of the removable adhesive).

The special adhesive has been specifically designed to be easily removed without damaging the device and to be reused several times even if it is stored away, wet and wrinkled.


USEFUL INSTRUCTIONS and TIPS - for a correct application of the TEXTILE SmartSkins

 FOR A PERFECT ADHESION heat the smartskin to attack it and remove it.

To guarantee the full effectiveness of the glue and the perfect adhesion and removal of the skins, we recommend you to 

CAREFULLY follow these recommendations:

Clean the surface of the device well, removing dust and stains, then attach the skin; to activate BETTER the special glue we recommend heating the skin with a hair dryer for at least 10/20 seconds so that the glue activates perfectly and the glue itself softens to such a point that it adheres properly to the device.


DO NOT THROW AWAY THE PACKAGE!

At times when the SmartSkin is not used or if it is to be replaced with another one, we recommend storing it on the original packaging. In fact, the liner of the package is the most suitable housing to protect the glue and to allow the re-use of the smartskin later.

Furthermore, by not throwing the packaging, you help us preserve the environment by following our mission to generate as little waste as possible in product design.

For any additional information do not hesitate to contact us. Hangover Smartskin support service is available to you every day - 24h.

Follow us on socials looking for @hangoversmartskin to get updates on news and details and to share your experience with Hangover SmartSkin!

New Account Register

Already have an account?
Log in instead Or Reset password